Solenoid Control Valve IM-EL
The IM-EL electrohydraulic valve is designed for automatic hydraulic flow management, allowing opening and closing via a 3-way bistable solenoid valve. It is ideal for applications requiring precise fluid control, such as irrigation systems or industrial plants.
Technical Specifications:
- Valve Type: 3-way – 2 threads – Normally Open (N.O.)
- Body Material: Brass
- Connections:
- Ø1/8” F BSP for the inlet
- Ø1/8” M BSP for the outlet
- Nominal Pressure: 10 bar
- Operating Voltage: 24V AC, 50-60 Hz
- Protection Rating: IP65
Accessories:
- 3-Way Solenoid EL:
- Type: 3-way – 2 wires – Normally Closed (N.C.)
- Body: Nylon
- Connections: Ø1/8” F BSP
- Nominal Pressure: 10 bar
- Voltage: 24V AC 50÷60 Hz
- Protection Rating: IP66
- 3-Way Bistable Solenoid EL-BI:
- Type: 3-way – 2 wires – Bistable
- Body: Nylon
- Connections: Ø1/8” F BSP
- Nominal Pressure: 10 bar
- Voltage: 9-12V DC
- Protection Rating: IP66
- 3-Way Bistable Solenoid EL-BA:
- Type: 3-way – 2 wires – Bistable
- Body: Reinforced Nylon
- Connections: Ø1/8” F BSP
- Nominal Pressure: 10 bar
- Voltage: 6-24V DC
- Protection Rating: IP66
- 3-Way Bistable Solenoid EL-OT:
- Type: 3-way – 2 threads – Normally Open (N.O.)
- Body: Brass
- Connections: Ø1/8” F BSP (side coil)
Ø1/8” M BSP - Nominal Pressure: 10 bar
- Voltage: 24V AC 50÷60 Hz
- Protection Rating: IP65
- 3-Way Bistable Solenoid EL-16:
- Type: 3-way – 2 threads – Normally Open (N.O.)
- Body: Brass
- Connections: Ø1/8” F BSP (side coil)
Ø1/8” M BSP - Nominal Pressure: 16 bar
- Voltage: 24V AC 50÷60 Hz
- Protection Rating: IP65
Operating Principle:
The valve operates through a 3-way bistable solenoid. The standard version features a Normally Open (N.O.) function, where the valve closes when the solenoid is not powered and fully opens when the solenoid is activated, allowing full hydraulic flow.
Emergency Manual: In the event of electrical failure, a manual handle can be used to operate the valve manually.
Optional Accessories:
- Filter Ø1/4”M-1/8”F
- PEAD Tube Ø6 mm
- Reduced Nipple Ø1/4”M-1/8”M
Installation Recommendations:
- First use: Connect the solenoid cables to the electrical control circuit and operate the valve to ensure the correct evacuation of air from the control chamber.
- Safety: Do not disassemble the valve when the system is under pressure.